Home » 2017 » June

Monthly Archives: June 2017

Aduino Nano

nano

Configure FightStick

RetroPie button mapping and hotkeys

On first boot , you will be welcomed with the following screen- this menu will configure your controls for both Emulationstation and RetroArch Emulators.

c2

If this is not the first start and you already have configured controller press the start button and choose configure input.

c1

Hold down any button on the FightStick and the name will appear at the bottom and then open up into a configuration menu.

c3

Follow the on-screen instructions to configure the FightStick – once you configure all buttons just hold down any button to skip the unused ones. There are 6 action and 2 menu buttons and the you can map them as an SNES controller. When you get to OK press the button you have configured as “A”. Use SELECT for default hotkey.

Hotkeys

Retropie fightstick mapping and hotkeys

 

Assembling the DIY Fightstick

Shop RetroPie FightStick

retropie fightstick assembly usb encoder

 

retropie fightstick assembly panels

retropie fightstick assembly 3

 

retropie fightstick assembly 4

retropie fightstick assembly 5

retropie fightstick assembly 5a1

Polarity doesn’t matter for buttons, you can connect them either way. Make sure to connect the joystick in the correct way(shown in the image below), otherwise only one direction will work.

retropie fightstick assembly 5a

retropie fightstick assembly 5b

retropie fightstick assembly 6

retropie fightstick assembly 6a

retropie fightstick assembly 6b

retropie fightstick assembly 7

retropie fightstick assembly 8

retropie fightstick assembly 8a