64 bright RGB LEDs , arranged in an 8x8 matrix, each pixel is individually addressable. Only one microcontroller pin is required to control all the LEDs, and you get 24 bit color for each LED.
There are two 3-pin connection ports. Solder wires to the input port and provide 5VDC to the +5V and ground pins, then connect the DIN pin to your microcontroller. If you're using the NeoPixel Arduino library, use digital #6. You'll also need to make a common ground from the 5V power supply to the microcontroller/Arduino. Since each LED can draw as much as 60mA (thats up to 3.5 Amps per panel if all LEDs are on bright white!) we suggest 5V 2A power supply.
You can chain these together. For the second shield, connect the DIN connection to the first panel's DOUT. Also connect a ground pin together and power with 5V. You can chain as many as you'd like, you will need a 5V 10A power supply for chaining 4 of these!
Compatible with a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc.
Write a review and let shoppers know what you think of this product.